Activator Feeder
Activator Feeder
Home  >>  News

Why does ceramic lagging use for both driven and non-driven pulleys?

Jan 09, 2017

There are a few basic reasons for the application of ceramic lagging to both driven and non-driven pulleys.

Ceramic lagging serves as a protective layer guarding the pulley from premature failure due to abrasion.


Ceramic Lagging for sale


While protecting the pulley, the lagging can also protect the conveyor belting from a similar sort of wear failure caused by abrasion.

Ceramic lagging can also creates an increase in friction between the pulley and the belt which is usually needed when there is a requirement for torque transfer through the pulley to the belt.

Ceramic lagging is applied to nearly all conveyors to address at least one (if not all) of the basic points above. In addition to performing the points listed above, lagging should be applied in a way that the lagging itself does not wear prematurely due to abrasion, or delaminating from the pulley, as well as cause belt wear.


  • E-mail: guorui@qhdjhzg.com
  • Tel: +86 335 5175 770
  • Fax: +86 335 5175 750
  • Add: No.1 of Taichang Road, Lingang Industrial Park, Shanhaiguan District, Qinhuangdao City, Hebei Province, China
  • *
  • *
  • *
  • *

Copyright © Qinhuangdao Jinheng Heavy Industry Co., Ltd. All Rights Reserved