Activator Feeder
Activator Feeder
Home  >>  News

How to repair vibrating screen?

Dec 05, 2016

When problems are found during the periodic inspection of the vibrating screen, the vibrating sieve should be repaired. Which including timely adjustment of V-belt tension, replacement of new belt, replacement of worn sieve surface and longitudinal pad, replacement of damping spring, replacement of rolling bearing, transmission gear and seal, replacement of damaged bolt, repair of broken frame components.


vibrating screen


The side plates and beams of the shield frame shall be protected against stress concentration, and the shaker shall not allow the welding of these components. Vibrator for the next burst should be replaced immediately, the side plate found crack damage, cracks should be promptly in the hole 5mm hole, and then split part of the steel plate. Disassembly, maintenance and assembly of the exciter shall be carried out by qualified personnel in a clean place.

Check the wear of the rolling bearing after the vibrating screen, the surface inspection of the vibrating screen gear, the connection of the parts of the vibrating screen, the smoothing circuit of the vibrating screen cleaning tank, the vibrating screen to remove the attachment surface vibrating screen and replace all seals and other damaged parts.


  • E-mail: guorui@qhdjhzg.com
  • Tel: +86 335 5175 770
  • Fax: +86 335 5175 750
  • Add: No.1 of Taichang Road, Lingang Industrial Park, Shanhaiguan District, Qinhuangdao City, Hebei Province, China
  • *
  • *
  • *
  • *

Copyright © Qinhuangdao Jinheng Heavy Industry Co., Ltd. All Rights Reserved