The use of the conveyor belt provides great convenience for lots of jobs, because many times the use of the conveyor belt is under bad conditions, so want to conveyor with a longer life expectancy, in peacetime attention maintenance work!
1. The conveyer belt in transportation and storage, should be kept clean, avoid direct sunlight, rain and snow dip tube, prevent with acid, alkali, oil, organic solvent such as impact the quality of the rubber material contact, and distance heating device 1 metres away.
2. When the storage room temperature should be kept at 15 ℃, between + 40 ℃, relative humidity should be kept between 50-80%.
3. Conveyor belt should be stored for the purpose of placing, not fold, should be placed during quarterly turn once.
4. Conveyor belt running speed should not be more than 5.0 m/s, large transport blocks of abrasion resistant materials and using fixed plough type discharging device should be used as far as possible at low speed. Within the prescribed speed, will influence the service life of the tape.
Drive of the conveyor roller conveyor belt and the diameter of cloth layer, the relationship between transmission drum redirection roller and the roller groove Angle, should according to the regulations of lose send machine design, rational selection.
6. To reduce the material impact to the tape and wear and tear tape by material should shorten the roller spacing and buffer action. To prevent scraping the broken belt, keep-off device scraper cleaning device and discharging device with the contact part of the tape should adopt suitable rubber hardness, do not use with layers of glue to take the lead.
7. Conveyor belt in use process should pay attention to the following items:
(1) avoid rollers is covered by the material, causing rotation is ineffective, prevent leakage of material between the roller and the tape, pay attention to the lubrication activities section, but not greasy dirt conveyor belt.
(2) to avoid loading start.
(3) the belt running deviation, timely measures should be taken to correct.
(4) found that tape local damage should be repaired in a timely manner, so as not to expand.
(5) to avoid tape block from frame, pillar or block material, to prevent the touch broken rip.
Copyright © Qinhuangdao Jinheng Heavy Industry Co., Ltd. All Rights Reserved