Activator Feeder
Activator Feeder
Home  >>  News

How to mount vibration exciter?

Jun 20, 2016

Vibration exciter is measured object infliction of predetermined excitation force required to produce the desired vibration devices. Here I tell you the 5 steps of mounting vibration exciter.


Vibration Exciter


1. Clean the outside of the machine and drives the internal beams, and exciter installation site.

2. Lifting eye bolt from the exciter and the drive beam at the location.

3. Loosen the drive beam exciter bolts.

4. Locating pins positioned exciter. The two pins diagonally installed, and tighten the screws to the appropriate extent.

5. Remove the exciter pin, mounting screws instead of pins, according to the torque force required to tighten all bolts.


  • E-mail: guorui@qhdjhzg.com
  • Tel: +86 335 5175 770
  • Fax: +86 335 5175 750
  • Add: No.1 of Taichang Road, Lingang Industrial Park, Shanhaiguan District, Qinhuangdao City, Hebei Province, China
  • *
  • *
  • *
  • *

Copyright © Qinhuangdao Jinheng Heavy Industry Co., Ltd. All Rights Reserved