Activator Feeder
Activator Feeder
Home  >>  News

How to install vibration exciter?

May 03, 2016

Vibration exciter is measured object infliction of predetermined excitation, inoder to produce the desired vibration means. Here I will tell you the installation of vibration exciter.

vibration exciter

1. Clean the machine both outside and internal, besides the installation site of exciter.

2. Lifting eye bolt from the exciter and the drive beam at the location.

3. Loosen the drive beam exciter bolts.

4. Locating pins positioned exciter. The two pins diagonally installed, and tighten the screws to the appropriate extent.

5. Remove the exciter pin, mounting screws instead of pins, according to the torque force required to tighten all bolts.

  • E-mail:
  • Tel: +86 335 5175 770
  • Fax: +86 335 5175 750
  • Add: No.1 of Taichang Road, Lingang Industrial Park, Shanhaiguan District, Qinhuangdao City, Hebei Province, China
  • *
  • *
  • *
  • *

Copyright © Qinhuangdao Jinheng Heavy Industry Co., Ltd. All Rights Reserved